A view from the side of the Yeti SB115 shows the clearance between the bottle and the bike's rear shock. The bottle's offset keeps the rear shock free from unwanted tapping or rubbing while also maintaining clearance for the rider's pedal stroke.
A close-up view of B-RAD Bottle Shift installed on the Yeti SB115. The B-RAD Bottle Shift is mounted to the bike with purple Water Bottle Cage Bolts. Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment. This allows the bottle to be mounted as low as possible in the frame for improved clearance or moved upward for easier reach.
The B-RAD 2-Slot Base forms the foundation of this particular setup. The B-RAD 2-Slot Base can move a bottle or other accessory up to 54mm to an optimal location, even on a smaller or dual suspension frames. In this case, we've used the B-RAD 2-Slot Base as a mounting point for the B-RAD TekLite Roll-Top Bag 1.0L Medium Accessory Mount.
The B-RAD TekLite Roll-Top Bag 1.0L is mounted onto the B-RAD 2-Slot Mounting Base via the B-RAD TekLite Roll-Top Bag Medium Accessory Mount. We've attached a Medium Accessory Mount to the B-RAD 2-Slot Mounting Base with the Mounting Base's included B-RAD bolts. Then, we attached the B-RAD TekLite Roll-Top Bag 1.0 to the Medium Accessory Mount with the TekLite Roll-Top Strap, included with the B-RAD TekLite Roll-Top Bag 1.0L.
To maximize available storage space ahead of an overnight camping trip, we mounted a B-RAD 2-Slot Mounting Base onto the seat tube of this Otso Cycles Warakin Ti. In doing so, we were able to shift the seat tube's water bottle down and out of the way of the bike's top tube bag. For added storage, we mounted a B-RAD TekLite Roll-Top Bag 1.0L to the bottle bosses on the underside of the bike's downtube with the B-RAD Medium Accessory Mount.
A closer look at the Otso Cycles Warakin Ti. The B-RAD 2-Slot Base can be seen mounted onto the bike's seat tube, shifting the Morse Cage Ti Limited Edition Black down and away from the frame bag. By adjusting the height of the bottle cage on the seat tube, we're able to provide the rider with two 26oz water bottles that are positioned away from packed necessities yet still easily accessible while riding. The Medium Accessory Mounting Plate can be seen on the underside of the downtube. The TekLite Roll-Top Strap is threaded through this plate and then tightened over the TekLite Roll-Top Bag to keep everything in one place.
An even closer look at the B-RAD System in action. All mounts are secured with the bike's water bottle bolts as well as the included B-RAD bolts and hardware.
The B-RAD TekLite Roll-Top Bag 1.0L has been positioned on the B-RAD Medium Accessory Mount, away from the cranks and chainring. This prevents rub and wear—both on the TekLite bag and on the bike's components. The B-RAD TekLite Roll-Top Bag 1.0L is roomy and flexible. Riders can easily loosen or tighten the strap based on the bag's contents, thus eliminating any fears about losing a precious multi-tool on the trail.
The B-RAD TekLite Roll-Top Bag 0.6L has enough room for multi-tools and snacks while also remaining compact and out of the way. For this Ibis Ripmo, we decided to directly attach the bag to the frame's top tube with the bag's included TekLite Roll-Top Strap. This silicone-backed strap keeps the B-RAD TekLite Roll-Top Bag 0.6L from slipping and allows the bag to be directly attached to saddle rails, seat tubes, top tubes, and more. All B-RAD TekLite Roll-Top Bags are made from lightweight, durable material that protects the bag's contents from water, dirt, and other road grit.
To optimize this Otso Cycles Fenrir Stainless for a route with limited water stops, we added a B-RAD 3-Slot Mounting Base to the bike's downtube to lower water bottles away from the bike's top tube bag. We also mounted a B-RAD Double Bottle Adapter to the BRAD 3-Slot Mounting base to create room for an additional water bottle. Finally, we installed a B-RAD 2-Slot Mounting Base to the underside of the bike's downtube to create a secure mounting space for the B-RAD TekLite Roll-Top Bag 0.6L.
A closer look shows the B-RAD 3-Slot Mounting Base mounted to the bottle bosses on top of the Fenrir Stainless' downtube. With over 118mm of adjustment, the B-RAD 3-Slot Mounting Base allows you to position your bottles away from top tube bags and frame bags while still keeping both easily accessible.
To add an additional bottle, we mounted a B-RAD Double Bottle Adapter to the B-RAD 3-Slot Mounting Base. The B-RAD Double Bottle Adapter slightly offsets the bottles away from the bike, making it easier to mount two water bottles side-by-side.