We launched a new, improved B2B website for dealers, distributors, and OEM partners at b2b.wolftoothcomponents.com.

All accounts have been migrated to the new B2B website. Please bookmark the new website and log in with your previous account email to access B2B.

Contact dealers@wolftoothcomponents.com with any questions.

Enter B2B Wolf Tooth

Conversion kit to retrofit your standard EnCase Pump for Presta valves to work with Clik Valves.

Tools needed:

  • 8mm Allen key to remove the Presta Valve Housing
  • Spanner with tips that are 2mm or smaller to install the Schwalbe Clik Valve Housing

Presta to Clik Conversion

Step 1

Remove the original valve cover

Step 1

Step 2

Using an 8mm allen wrench, turn counter clockwise to remove the presta valve housing and internals

Step 2

Step 3

Place the Clik housing in the pump, rotating clockwise and tighten until the housing bottoms out using a spanner with tips smaller than 2mm

Step 3

Step 4

Fit the new valve cover over the groove of the pump head

Step 4