Wolf Tooth Front Axles are lightweight, easy to use, and friendly with your fork. They use a captive steel washer under the head that protects your fork, transfers more of the tightening torque to clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it. The new updated Wolf Tooth Front Axles now have an o-ring that makes them compatible with the Wolf Tooth Axle Handle Multi-Tool.
The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes.
An O-ring on the inside axle's end locks the Axle Handle Multi-Tool in place so it is secure while riding. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet.
- Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Designed for Wolf Tooth front and rear axles
Related Products
Tech Specs
Weight: 100 mm • 85 g | 110 mm • 87 g | 150 mm • 99 g
Material: 7075 T6 aluminum with plated steel washer
Diameter: 15 mm
Tool interface: 6 mm hex key
Torque spec: 12-15 Nm
Thread spec: 14x1.5
Thread length: 15mm
Made in the USA
WARNING Handling this product will expose you to chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For further information go to www.P65Warnings.ca.gov.